Description
- Micsig RCP series Rogowski current probe measures AC currents up to 6000Apk, max. bandwidth up to 30MHz, withstand voltage is up to 1kVrms, nearly zero insertion impedance, greatly minimized the interference to the DUT.
- A 1.6mm thin, flexible, clip-around Rogowski coil allow user easily pass through pin leg of TO-220 semiconductor devices. With 2% accuracy (typical) , accurately measures high-frequency and high-current signals like double-pulse dynamic test, monitor semiconductor switch current.
- Standard BNC interface to use on any oscilloscope, most compact flexible design easily solved the hard-to reach part issue, coil diameter support customzied made to meet more test requirements.
- The cross-sectional diameter of the coil is only 1.6mm, allow engineers measure current in most difficult-to-reach parts of the circuit, such as narrow pin spacing chip like TO-220, TO-47.
- The RCP has excellent high-frequency measurement capabilities, easily handles high-speed signals and rapidly changing current waveforms, helping to observe high-frequency harmonic components when measuring the Id current of MOSFETs. (as shown the oscillation section).
Applications
● Measuring current in motor drives and in particular power quality measurements in VSD, UPS or SMPS circuits
● Double-pulse testing to measure the pin currents of MOSFET and IGBT chips made of materials such as SiC and GaN
● Measurement of load current and high-order harmonic current in power electronics
● Measuring high frequency sinusoidal, pulsed or transient currents
● Measuring AC currents in 3-phase supply system
● Measuring the power consumption in semiconductors
● Measurement of 50/60Hz power frequency current
● Power converter development and diagnostics
Key Specifications
| Model | RCP60XS | RCP300XS | RCP600XS | RCP1200XS | RCP3000XS | RCP6000XS |
|---|---|---|---|---|---|---|
| Bandwidth | 85Hz – 30MHz | 10Hz – 30MHz | 10Hz – 30MHz | 12Hz – 30MHz | 3Hz – 30MHz | 2Hz – 30MHz |
| Peak current | 60Apk | 300Apk | 600Apk | 1200Apk | 3000Apk | 6000Apk |
| Output sensitivity | 100mV/A（10x） | 20mV/A （50X） | 10mV/A（100X） | 5mV/A （200X） | 2mV/A（500X） | 1mV/A（1000X） |
| Accuracy (typical) | 2% | 2% | 2% | 2% | 2% | 2% |
| Peak di/dt | 4kA/μs | 20kA/μs | 40kA/μs | 70kA/μs | 70kA/μs | 70kA/μs |
| Droop | 65%/ms | 9%/ms | 6%/ms | 3%/ms | 2%/ms | 2%/ms |
| Noise | ＜20mVpp | ＜18mVpp | ＜12mVpp | ＜5mVpp | ＜5mVpp | ＜5mVpp |
| Peak coil isolation voltage | AC 1kVrms (1min) (50Hz/60Hz) ( Rogowski coil part only) | |||||
| Cable length | 1.5m，from integrator to coil, customizable | |||||
| Rogowski coil inner diameter | 25mm, measures wires within 20mm in diameter , customizable | |||||
| Rogowski coil circumference | 80mm, customizable | |||||
| Coil cross-section diameter | 1.6mm | |||||
| Output impedance | 1MΩ | |||||
| Interface | Universal BNC | |||||
Additional information
| model | RCP60XS, RCP300XS, RCP600XS, RCP1200XS, RCP3000XS, RCP6000XS |
|---|---|
| Brand | MICSIG |
Description
- Micsig RCP series Rogowski current probe measures AC currents up to 6000Apk, max. bandwidth up to 30MHz, withstand voltage is up to 1kVrms, nearly zero insertion impedance, greatly minimized the interference to the DUT.
- A 1.6mm thin, flexible, clip-around Rogowski coil allow user easily pass through pin leg of TO-220 semiconductor devices. With 2% accuracy (typical) , accurately measures high-frequency and high-current signals like double-pulse dynamic test, monitor semiconductor switch current.
- Standard BNC interface to use on any oscilloscope, most compact flexible design easily solved the hard-to reach part issue, coil diameter support customzied made to meet more test requirements.
- The cross-sectional diameter of the coil is only 1.6mm, allow engineers measure current in most difficult-to-reach parts of the circuit, such as narrow pin spacing chip like TO-220, TO-47.
- The RCP has excellent high-frequency measurement capabilities, easily handles high-speed signals and rapidly changing current waveforms, helping to observe high-frequency harmonic components when measuring the Id current of MOSFETs. (as shown the oscillation section).
Applications
● Measuring current in motor drives and in particular power quality measurements in VSD, UPS or SMPS circuits
● Double-pulse testing to measure the pin currents of MOSFET and IGBT chips made of materials such as SiC and GaN
● Measurement of load current and high-order harmonic current in power electronics
● Measuring high frequency sinusoidal, pulsed or transient currents
● Measuring AC currents in 3-phase supply system
● Measuring the power consumption in semiconductors
● Measurement of 50/60Hz power frequency current
● Power converter development and diagnostics
Key Specifications
| Model | RCP60XS | RCP300XS | RCP600XS | RCP1200XS | RCP3000XS | RCP6000XS |
|---|---|---|---|---|---|---|
| Bandwidth | 85Hz – 30MHz | 10Hz – 30MHz | 10Hz – 30MHz | 12Hz – 30MHz | 3Hz – 30MHz | 2Hz – 30MHz |
| Peak current | 60Apk | 300Apk | 600Apk | 1200Apk | 3000Apk | 6000Apk |
| Output sensitivity | 100mV/A（10x） | 20mV/A （50X） | 10mV/A（100X） | 5mV/A （200X） | 2mV/A（500X） | 1mV/A（1000X） |
| Accuracy (typical) | 2% | 2% | 2% | 2% | 2% | 2% |
| Peak di/dt | 4kA/μs | 20kA/μs | 40kA/μs | 70kA/μs | 70kA/μs | 70kA/μs |
| Droop | 65%/ms | 9%/ms | 6%/ms | 3%/ms | 2%/ms | 2%/ms |
| Noise | ＜20mVpp | ＜18mVpp | ＜12mVpp | ＜5mVpp | ＜5mVpp | ＜5mVpp |
| Peak coil isolation voltage | AC 1kVrms (1min) (50Hz/60Hz) ( Rogowski coil part only) | |||||
| Cable length | 1.5m，from integrator to coil, customizable | |||||
| Rogowski coil inner diameter | 25mm, measures wires within 20mm in diameter , customizable | |||||
| Rogowski coil circumference | 80mm, customizable | |||||
| Coil cross-section diameter | 1.6mm | |||||
| Output impedance | 1MΩ | |||||
| Interface | Universal BNC | |||||
Additional information
| model | RCP60XS, RCP300XS, RCP600XS, RCP1200XS, RCP3000XS, RCP6000XS |
|---|---|
| Brand | MICSIG |
Reviews
There are no reviews yet.
All products are free shipping
The best service for you
Original factory production
All products are free shipping
The best service for you
Original factory production
Reviews
There are no reviews yet.