Description
♦ Master-slave parallel with current sharing technology, up to 1MVA, multiple units in parallel work as one
♦ Voltage ranges : 350/700/1050 VL-N*3
♦ Up to 50th harmonic simulation and analysis with built-in IEC61000-3-2/3-12 regulations*1
♦ Output frequency: 16-2400Hz, programmable slew rate setting for changing voltage and frequency
♦ Built-in single/3-phase AC power meter
♦ 4 output modes: AC/DC/AC+DC/DC+AC
♦ Choose single phase, three-phase, reverse phase output mode, to simulate 3-phase imbalance, 3-phase harmonics imbalance, 3-phase split phase test, reverse phase sequence tests for 3-phase models
and etc.
♦ Harmonics, inter-harmonics waveform synthesizer
♦ Programmable output impedance
♦ Intuitive touch screen interface
♦ Simulate arbitrary waveform output, support csv. file import
♦ High current crest factor, suitable for inrush current testing*2
♦ Built-in various waveforms
♦ List mode simulates the power supply reproduction function to realize the simulation function of instantaneous power interruption
♦ Output 0-360 ° start/stop phase angle can be set
♦ Surge/Sag function
♦ Relay CTRL function, to cut off the connection between instrument and DUT
♦ Built-in waveforms compliance with the IEC61000-4-11/ 4-13/4-14/4-28
♦ Built-in USB/CAN/LAN/Digital IO interface, optional GPIB / Analog&RS232
♦ Optional software can help complete the pre-compliance standards test of civil avionics/electrical ships interms of the multi-national safety regulations*1
♦ Support CANopen*1、Modbus、LXI、SCPI communication*1 Voltage and current harmonic analysis / Voltage harmonic simulation
*2 Maximum CF is up to 6 within peak currnt range
Functions and Advantages
3U/21kVA high power density
With only 3U size, ITECH IT7800E can reach both 21kVA forpower and 350V L-N for voltage. Compared with conven tionalAC source, it saves a lot of space for users.
Master/Slave parallel
ITECH IT7800 series can provide more power by using the master/slave parallel output function, with 64 units in paralleled, to achieve total output power max. 960kVA.
IT7800 comes with synchronous On/Off input and output signals, which ensures the synchronization of paralleling and ensures synchronous current sharing of multiple modules. After paralleling, not only all functions are retained, but there is no loss of accuracy. Make the construction of the power system faster, more flexible, and more economical, whether it is a stand-alone test or ATE system, it can be easily reached.
AC、DC、AC+DC、DC+AC
The IT7800E series has four output modes: AC, DC, AC+DC, DC+AC. It not only provides pure AC/DC output, but also can use AC+DCand DC+AC output modes to realize “AC output plus DC bias” And “DC output waveform with ripple”, which cover a wider range of
applications.
Single phase, three phase, reverse phase
The IT7800E series provides multiple output modes such as single-phase, three-phase and reverse phase, which can be selected by the user through the panel menu. By programming ,it can simulate three-phase unbalance, three-phase harmonic unbalance, lack of phase test, phase sequence reverse connection and other tests, which are flexible and cover more applications. At the same time, IT7800E’s reverse mode can also provide a high-voltage test solution. Its voltage can be increased to twice and the power remains 2/3. For example, if it is set to 350V, the actual output voltage can reach 700V after the reverse mode is selected.
Additional information
| MODEL | IT78126E-350-630, IT78105E-350-525, IT7884E-350-420, IT7863E-350-315, IT7842E-350-210, IT7821E-350-105 |
|---|---|
| Brand | ITECH |
Description
♦ Master-slave parallel with current sharing technology, up to 1MVA, multiple units in parallel work as one
♦ Voltage ranges : 350/700/1050 VL-N*3
♦ Up to 50th harmonic simulation and analysis with built-in IEC61000-3-2/3-12 regulations*1
♦ Output frequency: 16-2400Hz, programmable slew rate setting for changing voltage and frequency
♦ Built-in single/3-phase AC power meter
♦ 4 output modes: AC/DC/AC+DC/DC+AC
♦ Choose single phase, three-phase, reverse phase output mode, to simulate 3-phase imbalance, 3-phase harmonics imbalance, 3-phase split phase test, reverse phase sequence tests for 3-phase models
and etc.
♦ Harmonics, inter-harmonics waveform synthesizer
♦ Programmable output impedance
♦ Intuitive touch screen interface
♦ Simulate arbitrary waveform output, support csv. file import
♦ High current crest factor, suitable for inrush current testing*2
♦ Built-in various waveforms
♦ List mode simulates the power supply reproduction function to realize the simulation function of instantaneous power interruption
♦ Output 0-360 ° start/stop phase angle can be set
♦ Surge/Sag function
♦ Relay CTRL function, to cut off the connection between instrument and DUT
♦ Built-in waveforms compliance with the IEC61000-4-11/ 4-13/4-14/4-28
♦ Built-in USB/CAN/LAN/Digital IO interface, optional GPIB / Analog&RS232
♦ Optional software can help complete the pre-compliance standards test of civil avionics/electrical ships interms of the multi-national safety regulations*1
♦ Support CANopen*1、Modbus、LXI、SCPI communication*1 Voltage and current harmonic analysis / Voltage harmonic simulation
*2 Maximum CF is up to 6 within peak currnt range
Functions and Advantages
3U/21kVA high power density
With only 3U size, ITECH IT7800E can reach both 21kVA forpower and 350V L-N for voltage. Compared with conven tionalAC source, it saves a lot of space for users.
Master/Slave parallel
ITECH IT7800 series can provide more power by using the master/slave parallel output function, with 64 units in paralleled, to achieve total output power max. 960kVA.
IT7800 comes with synchronous On/Off input and output signals, which ensures the synchronization of paralleling and ensures synchronous current sharing of multiple modules. After paralleling, not only all functions are retained, but there is no loss of accuracy. Make the construction of the power system faster, more flexible, and more economical, whether it is a stand-alone test or ATE system, it can be easily reached.
AC、DC、AC+DC、DC+AC
The IT7800E series has four output modes: AC, DC, AC+DC, DC+AC. It not only provides pure AC/DC output, but also can use AC+DCand DC+AC output modes to realize “AC output plus DC bias” And “DC output waveform with ripple”, which cover a wider range of
applications.
Single phase, three phase, reverse phase
The IT7800E series provides multiple output modes such as single-phase, three-phase and reverse phase, which can be selected by the user through the panel menu. By programming ,it can simulate three-phase unbalance, three-phase harmonic unbalance, lack of phase test, phase sequence reverse connection and other tests, which are flexible and cover more applications. At the same time, IT7800E’s reverse mode can also provide a high-voltage test solution. Its voltage can be increased to twice and the power remains 2/3. For example, if it is set to 350V, the actual output voltage can reach 700V after the reverse mode is selected.
Additional information
| MODEL | IT78126E-350-630, IT78105E-350-525, IT7884E-350-420, IT7863E-350-315, IT7842E-350-210, IT7821E-350-105 |
|---|---|
| Brand | ITECH |
Reviews
There are no reviews yet.
All products are free shipping
The best service for you
Original factory production
All products are free shipping
The best service for you
Original factory production
Reviews
There are no reviews yet.